High PVC film‐forming composite latex particles via miniemulsification,part 1: Preparation

Miniemulsification technology was used to encapsulate TiO₂ particles inside a styrene/n‐butyl acrylate copolymer with high loading levels (11 to 70% PVC (pigment volume concentration)). In this approach, a St/BA copolymer dissolved in toluene in the presence of a costabilizer (hexadecane) was mixed with a dispersion of TiO₂ particles in toluene and sonified, and then emulsified in an aqueous surfactant solution by sonification. The effect of sonification time on both the dispersibility of the TiO₂ particles in the presence of the copolymer and hexadecane and on the encapsulated particle size was investigated. Particle size analysis by dynamic light scattering showed that these composite latexes are quite stable. It was also found that as the TiO₂ loading increased from 11 to 43% PVC, the particle size of the TiO₂ dispersion decreased while the polymer‐encapsulated TiO₂ particle size increased. The effect of surfactant concentration (sodium lauryl sulfate, SLS) on the encapsulated particle size was investigated using four different SLS concentrations in the 11% PVC system. The results showed that as the SLS concentration increased the particle size decreased, as expected. Also it was found that the minimum surfactant concentration that gives stable encapsulated TiO₂ particles is above 10 mM SLS. The role of HD in the recipe was studied for an artificial latex containing no TiO₂ and one prepared at 11% PVC, in terms of particle size before and after solvent stripping, and its effect on the T_g. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 4504–4516, 2006     

Dense Al2O3/ZrO2 Particulate Composites by Free Sintering of Coated Powders

Composite powders, prepared by coating coarse ZrO₂ particles with fine Al₂O₃ powder using a chemical precipitation technique, were compacted and sintered freely at a constant heating rate of 4°C/min to ∼1600°C. Composites containing up to ∼30 vol% inclusions were sintered to nearly full density under the same conditions used for the unreinforced matrix. Furthermore, the sintering kinetics were not influenced significantly by the inclusion volume fraction. The sinterability of the composites formed from the coated powders was significantly better than that for similar composites formed from mechanically mixed powders. The present data provide a further demonstration that the use of coated powders may have widespread applicability for the fabrication, by free sintering, of dense ceramic particulate composites.     

HColonies: a new hybrid metaheuristic for medical data classification

Medical data feature a number of characteristics that make their classification a complex task. Yet, the societal significance of the subject and the computational challenge it presents has caused the classification of medical datasets to be a popular research area. A new hybrid metaheuristic is presented for the classification task of medical datasets. The hybrid ant–bee colonies (HColonies) consists of two phases: an ant colony optimization (ACO) phase and an artificial bee colony (ABC) phase. The food sources of ABC are initialized into decision lists, constructed during the ACO phase using different subsets of the training data. The task of the ABC is to optimize the obtained decision lists. New variants of the ABC operators are proposed to suit the classification task. Results on a number of benchmark, real-world medical datasets show the usefulness of the proposed approach. Classification models obtained feature good predictive accuracy and relatively small model size.     

Rheological behaviour of polysaccharide aqueous solutions

Several data relative to the viscosity of water-soluble polysaccharide solutions were collected from the literature and processed by different rheological models. Some relationships between the viscosity of these polymer solutions, their molecular weight and their solution concentrations, were established and their validity checked. Thus, an accurate equation correlating the viscosity and both the shear rate and the solution concentration of different water soluble polysaccharides (xanthan, hyaluronan, carboxymethylcellulose) was deduced on the basis of Cross' model which suggests two domains in which the viscosity is constant, i.e. very low and very high shear rate ranges. Then, an expression relating the zero-shear viscosity (A) and the concentration of their solutions was proposed. Finally, an alternative equation to that of Mark–Houwink correlating the molecular weight and the intrinsic viscosity of the water-soluble polysaccharides studied in this paper was found.     

Arylidene polymers. XVIII. Synthesis and thermal behavior of organometallic arylidene polyesters containing ferrocene derivatives in the main chain

A new interesting category of organometallic polyesters based on diarylidenecycloalkanones containing ferrocene derivatives in the polymer main chain has been prepared by interfacial polycondensation of 1,1′-dichlorocarbonyl ferrocene or 1,1′-dichlorocarbonyl-4,4′-diiodoferrocene with 2,5-bis(p-hydroxybenzylidene)cyclopentanone, 2,5-divanillylidenecyclopentanone, 2,6-bis(p-hydroxybenzylidene)cyclohexanone, 2,6-divanillylidenecyclohexanone, and 2,7-bis(p-hydroxybenzylidene) cycloheptanone. The resulting polyesters were characterized by elemental analyses, infrared spectroscopy, solubility, and viscometry measurements. The thermal behavior of the synthesized polymers was evaluated by thermal gravimetric analysis and correlated with their structures. The crystallinity of all polymers were examined by x-ray diffraction analysis. Moreover, the electrical conductivity of a selected example of polymer was investigated above the temperature range (300–500 K) and showed that it followed an Arrhenius-type equation with activation energy 2.09 eV. © 1993 John Wiley & Sons, Inc.     

Recycling of pharmaceutical waste gelatin for controlled‐release applications. I. A 2,4‐dicholorphenoxy acetic acid based system

Gelatin is a natural macromolecular protein. It contains a wide variety of amino acids in its polymer structure, and it is colorless to yellowish, water‐soluble, and tasteless. It is used as a dispersing agent, sizing medium, and coating for photographic films and in pharmaceutical formulations. In this study, biodegradable mulching, based on waste gelatin from pharmaceutical gelatin scraps (derived from pharmaceutical soft gelatin capsule production), was formulated via the casting of water solutions or suspensions into flexible and consistent films. Gelatin was blended with synthetic materials such as poly(vinyl alcohol) and other natural wastes such as sugar cane bagasse and sawdust. To all formulations, 2,4‐dichlorophenoxy acetic acid (2,4‐D) was added as a herbicide. The morphology and mechanical properties of the samples were investigated with scanning electron microscopy and tensile testing, respectively. The results showed that the produced films had controlled‐release properties. The effects of various additives and crosslinking on the films and the release of the herbicide 2,4‐D from the films were also investigated. The introduction of synthetic and natural additives reduced the release rate of 2,4‐D. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 2313–2319, 2004     

Antimicrobial activity of statistical polymethacrylic sulfopropylbetaines against gram‐positive and gram‐negative bacteria

A series of statistical copolymers derived from 2‐(dimethylamino)ethyl methacrylate with four different hydrophobic comonomers (ethyl, butyl, cyclohexyl, and octyl methacrylates) have been prepared via conventional free radical copolymerization under bulk conditions. The copolymers have been subsequently modified, with 1,3‐propanesultone to yield the corresponding polysulfoproylbetaine derivatives. Those copolymers exhibiting the requisite aqueous solubility have been screened with respect to their antimicrobial activity against two common and notorious pathogens, namely Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli). We show that certain copolymers do indeed exhibit antimicrobial activity. The extent of activity is related to the molecular characteristics of the materials such as the molar composition and structure of the hydrophobic comonomer. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 1036–1041, 2006     

Sintering of Ceramic Particulate Composites: Effect of Matrix Density

Composites consisting of a fine-grained, polycrystalline zinc oxide matrix and <10 vol% coarse, rigid silicon carbide inclusions were prepared by the same mixing procedure and then compacted to produce samples with matrix densities of 0.45 and 0.68 of the theoretical. The samples were sintered under identical temperature profiles in separate experiments that employed either a constant rate of heating of 4°C/min or near isothermal heating at 735°C. The ratio of the densification rate of the composite matrix to the densification rate of the unreinforced zinc oxide was found to be independent of the initial matrix density. This ratio increased significantly with temperature in the constant-heating-rate experiments but was relatively constant in the isothermal experiments. The results indicate that microstructural coarsening may be an important mechanism for explaining the reduced sinterability of polycrystalline matrix composites.     

Ceramics for Prosthetic Hip and Knee Joint Replacement

The most commonly used bearing couple in prosthetic hip or knee joint replacements consists of a cobalt–chrome (CoCr) metal alloy articulating against ultrahigh-molecular-weight polyethylene. Ceramics have been used as an alternative to metal-on-polyethylene in joint replacement surgery of arthritic hips and knees since the 1970s. In prosthetic hip and knee bearings, ceramic surfaces offer a major benefit of drastically reduced wear rates and excellent long-term biocompatibility, which can increase the longevity of prosthetic hip and knee joints. This benefit is important clinically because hip and knee replacement has become a very common surgical procedure, particularly in the United States, and because these procedures are being increasingly performed in younger patients who place greater demands on the prosthetic bearings. However, ceramics are brittle and the risk of catastrophic bearing failure in vivo , while rare, is a major concern. Improvements in material quality, manufacturing methods, and implant design have resulted in a drastic reduction of the incidence of such failures, so that modern ceramic bearings are safe and reliable if used with components of proven design and durability. Future material improvements are actively being investigated to reduce the risk of ceramic-bearing failures even further. The purpose of this article is to review the structure, properties, applications, and limitations of the ceramics that have been used in orthopedic bearings, and to describe the new ceramic composite materials and surface treatments that will be available for joint replacement surgery in the near future.